inspur.ispim.edit_ipv4 – Set ipv4 information.

Note

This plugin is part of the inspur.ispim collection.

To install it use: ansible-galaxy collection install inspur.ispim.

To use it in a playbook, specify: inspur.ispim.edit_ipv4.

New in version 1.0.0: of inspur.ispim

Synopsis

  • Set ipv4 information on Inspur server.

Parameters

Parameter Choices/Defaults Comments
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
interface_name
string / required
    Choices:
  • eth0
  • eth1
  • bond0
Set interface_name.
ipv4_address
string
If DHCP is disabled, specify a static IPv4 address to be configured for the selected interface.
Required when ipv4_dhcp_enable=static.
ipv4_dhcp_enable
string
    Choices:
  • dhcp
  • static
Enable 'Enable DHCP' to dynamically configure IPv4 address using Dynamic Host Configuration Protocol (DHCP).
ipv4_gateway
string
If DHCP is disabled, specify a static Default Gateway to be configured for the selected interface.
Required when ipv4_dhcp_enable=static.
ipv4_status
string
    Choices:
  • enable
  • disable
Enable or disable IPV4.
ipv4_subnet
string
If DHCP is disabled, specify a static Subnet Mask to be configured for the selected interface.
Required when ipv4_dhcp_enable=static.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
provider
dictionary
A dict object containing connection details.
host
string
Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
password
string
Specifies the password to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_PASSWORD will be used instead.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.
username
string
Configures the username to use to authenticate the connection to the remote device. If the value is not specified in the task, the value of environment variable ANSIBLE_NET_USERNAME will be used instead.

Examples

- name: Ipv4 test
  hosts: ism
  connection: local
  gather_facts: no
  vars:
    ism:
      host: "{{ ansible_ssh_host }}"
      username: "{{ username }}"
      password: "{{ password }}"

  tasks:

  - name: "Set ipv4 information"
    inspur.ispim.edit_ipv4:
      interface_name: "eth0"
      ipv4_status: "disable"
      provider: "{{ ism }}"

  - name: "Set ipv4 information"
    inspur.ispim.edit_ipv4:
      interface_name: "eth0"
      ipv4_status: "enable"
      ipv4_dhcp_enable: "dhcp"
      provider: "{{ ism }}"

  - name: "Set ipv4 information"
    inspur.ispim.edit_ipv4:
      interface_name: "eth0"
      ipv4_status: "enable"
      ipv4_dhcp_enable: "static"
      ipv4_address: "100.2.36.10"
      ipv4_subnet: "255.255.255.0"
      ipv4_gateway: "100.2.36.1"
      provider: "{{ ism }}"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
changed
boolean
always
Check to see if a change was made on the device.
message
string
always
Messages returned after module execution.
state
string
always
Status after module execution.


Authors

  • WangBaoshan (@ispim)